Filter
Top Products
3-3
Configuring the Switch
Where to Go From Here
3. In General tab, under Components checked are used by this connection,
click to select Internet Protocol (TCP/IP), and then click Properties to
open Internet Protocol (TCP/IP) Properties dialog box.
4. In Internet Protocol (TCP/IP) Properties dialog box, click to select Use
the following IP address.
5. In IP address, Subnet mask, and Default gateway, type your intended
information.
6. Click OK to save the changes and quit.
Where to Go From Here
For more information on the Web browser interface and all the
features that can be configured on the ProCurve 1800-8G switch, see
the ProCurve Series 1800 Switch Management and Configuration
Guide, which is available on the ProCurve Networking Web site,
http:/
/www.procurve.com
.