Filter
Top Products
4.
Remove the following brackets:
(2) Audio/USB connector bracket
(3) ExpressCard assembly bracket
(4) USB/RJ-45 connector bracket
NOTE: The audio/USB connector bracket, ExpressCard assembly bracket, and USB/RJ-45
connector bracket are included in the Bracket Kit, spare part number 482266-001.
5. Flex the right side of the base enclosure (1) until the USB connector and RJ-45 jack (2) are clear of
the base enclosure.
6. Lift the right side of the system board (3), and then swing it up and to the left until it rests upside
down on the left side of the computer.
Component replacement procedures 43