Filter
Top Products
LVDS
Array module: 80-pin
SCA (SCSI and power)
Rack-mount: 68-pin HD
LVDS
LVDS LVDS
Array module: 80-pin
SCA (SCSI and power)
Rack-mount: 68-pin HD
LVDS
Power Specifications
Power
requirements,
Internal
(including
rack-mount model)
+5V@3.0A (typical)
+5V@3.5A (max)
+12V@0.5A (typical)
+12V@2.5A (max)
+5V@2.5A (typical)
+5V@2.5A (max)
+12V@0.7A (typical)
+12V@2.1A (max)
+5V@2.5A (typical)
+5V@2.5A (max)
+12V@0.7A (typical)
+12V@2.1A (max)
Power
requirements,
External
100 to 240 VAC,
50-60 Hz, auto-ranging,
0.7A max
100 to 240 VAC,
50-60 Hz, auto-ranging,
0.7A max
100 to 240 VAC,
50-60 Hz, auto-ranging,
0.7A max
Power
requirements, Array
Module
+5V@3.0A (typical)
+5V@3.5A (max)
+12V@0.5A (typical)
+12V@2.5A (max)
N/A
+5V@2.5A (typical)
+5V@2.5A (max)
+12V@0.7A (typical)
+12V@2.1A (max)
Power consumption
10 Watts idle
19 Watts typical
38 Watts max
13 Watts idle
20 Watts typical
33 Watts max
13 Watts idle
20 Watts typical
33 Watts max
Environmental
Specifications
Temperature range
Operating: 50° F to 95° F (10° C to 40° C) at a minimum of 6CFM airflow
Storage: -40° F to 151° F (-40° C to 66° C)
Non-condensing
humidity range
Operating: 20 to 80% RH (non-condensing)
Storage: 10 to 95% RH (non-condensing)
Standards Compliance
CSA Certification to C22.2, No.60950 (cCSAus)
TÜV EN60950 (IEC 60950)
CE Declaration of Conformity
FCC 47 CFR Parts 15
NOM
VCCI
C-TICK
RRL
BSMI
GOSH
CB Certificate and Report (IEC 60950)
Front Panel LED
Indicators
HP Ultrium half-height tape drives have four LED indicators on the front panel:
Ready
Drive
Tape
Clean
Please consult the HP StorageWorks Ultrium Tape Drive documentation for more information on
how to use these LED indicators for ascertaining drive status and for help in troubleshooting your
HP Ultrium tape drive.
QuickSpecs
HP StorageWorks Ultrium Half-Height Tape Drives
Technical Specifications
DA - 12128 Worldwide QuickSpecs — Version 7 — 3/17/2006
Page 20