Filter
Top Products
6
5
4
3
2
2. Switch off your printer and remove all cables from the back of the
printer.
3. Lift up the 2 rear door latches to open the Rear Access Door.
4. Loosen the 4 screws on the metal panel to remove it.
5. Remove the PostScript 3 Module from its package. DO NOT touch the
metal connection points.
6. Position the PostScript 3 Module as shown in the illustration, and
insert it into Slot 1 or 2.
23
USG_EuCM.qxd 18/1/99 10:11 AM Page 23