Filter
Top Products
51
Connectivity / Network HP 2500C
Management Network-capable printer for DOS and Windows environments
HP PCL 3 Windows Driver Support for Windows NT 4.0,
Windows 3.1x/95/98
Centronics parallel, IEEE 1284 compliant
One network interface slot accepts optional HP MIO Print Servers
with support for Novell Netware, Microsoft LAN Manager, Windows
for Workgroups, Windows NT, IBM LAN Server, Unix environment
HP2500CM
Network-ready printer for DOS and Windows environments.
HP PCL 3 Windows Driver Support for Windows NT 4.0,
Windows 3.1x/95/98
Centronics parallel, IEEE 1284 compliant
HP MIO 10/100T/BNC print server with support for Novell
Netware Microsoft LAN Manager, Windows for Workgroups,
Windows NT, IBM LAN Server, Unix environment
Supports networking protocols IPX/SPX, TCP/IP, DLC/LLC,
and NetBEUI
Adobe PostScript 3 drivers for Windows
Automatic switching between languages and ports.
HP JetAdmin printer management software provides easy
printer setup, configuration and management. Latest versions
available from HP’s web site (http://www.hp.com/go/jetadmin)
HP WebJetAdmin printer management software available from
HP’s web site ( http://www.hp.com/go/webjetadmin ) for simple
installation, configuration and management from a common
web browser.
Paper Handling Standard input capacity of 400 sheets through two trays of 150
sheet and 250 sheet capacity.
Standard output capacity of 150 sheets (face-up)
Rear Manual Feed – single sheet only
Tray 1 (Input / Output Tray) – Sheets: up to 10, Cards: up to 4
Tray 2 (Upper Tray) – Sheets: up to 150, Cards: up to 60
Tray 3 (Lower Tray) – Sheets: up to 250
All input paths handle standard media sizes (as listed on page 15)
up to 13” x 19” (Super A3)
Additionally, Tray 1 and the Rear Manual Feed support media sizes
from 4” x 6” (101.6 mm x 152.4 mm) to 13” x 19” (330 mm x 483 mm)
Built-in media size sensors prevents printing on the wrong media
size.
USG_EuCM.qxd 18/1/99 10:11 AM Page 51