Filter
Top Products
33
MIO Menu
The MIO print server that is installed controls this menu and it varies accordingly. Please refer to
the documentation that comes with the print server for more information.
Item Values Explanation
PERSONALITY= AUTO Select the default printer language
AUTO PCL (personality).
PS Possible values are determined by which
valid languages are installed in the
printer. For example, if you have the PS
module installed, you will be able to
select between AUTO, PCL or PS.
Normally you should not change the
printer language (the default is AUTO). If
you change it to a specific printer
language, the printer will not automatically
switch from one language to another
unless specific software commands are
sent to the printer.
Configuration Menu
Item Values Explanation
PRINT PS ERRORS= OFF Select ON to print the PS error page when
OFF ON PS errors occur.
JAM RECOVERY= AUTO Determine how the printer behaves when a
AUTO ON paper jam occurs.
OFF
AUTO: The printer automatically selects the
best mode for printer jam recovery (usually
ON). This is the default setting.
ON: The printer automatically reprints pages
after a paper jam is cleared.
OFF: The printer does not reprint pages
following a paper jam. Printing performance
might be increased with this setting.
COPIES=1 1 to 99 Set the default number of copies by
selecting any number from 1 to 99. Press
[Value] once to change the setting by
increments of 1 or hold down [Value] to scroll.
PostScript Menu (for HP 2500CM printer or with the HP 2500C PostScript Upgrade Kit only)
USG_EuCM.qxd 18/1/99 10:11 AM Page 33