Filter
Top Products
LLooaaddiinngg CCoommmmoonnllyy--UUsseedd MMeeddiiaa iinn TTrraayy 33
1. Grasp the sides of Tray 3 and pull it
out of the printer.
2. If you wish to change the paper size that has
been set in the tray, go to step
3. If you wish to load paper into tray using
the existing setting, go to step 5.
3. Snap the Paper Length and Width Guides
into the slots. Paper size markings are
indicated beside their respective slots.
4. If you are loading paper sizes such as B4,
A3, 11"x17", 13"x19" and 330x483mm, unlock
the tray lock, extend the tray and re-lock the
tray lock.
If you are loading paper sizes such as Letter,
A4 and Legal, check that the tray is not
extended. If it is, unlock the tray lock, push
in the tray and re-lock the tray lock.
5.Load paper by aligning the paper edge to
the Paper Length guide first.
6.Tap the left side of the stack of paper to
ensure that it is flushed to the right side of
the tray.
3
A3
3
3
3
A3
88
44
33
55
66
11
22