Filter
Top Products
To run the “Align Printheads” utility through
the Control Panel:
1. Press [Menu] until DIAGNOSTICS MENU
appears.
2. Press [Item] until ALIGN PRNT-HDS
appears.
3. Press [Select].
4. The printer will print a page with 5 sets of
alignment patterns.
5. In each set (A, B, C, D or E) select the most
aligned (straightest) pair of lines (1, 2, 3, 4 or 5).
6. Enter the corresponding numbers in the
Control Panel by pressing [Value].
7. When you have entered a value for a set,
press [Item] to move to the next.
8. When you have finished entering the
values press [Select].
9. The printer will print a confirmation page
consisting of 2 squares and a cross.
10.Check the confirmation page to see if the
lines on the squares and the cross are
aligned.
11. Re-align the printheads if the confirmation
page is not satisfactory.
If paper is jammed in the printer, follow these
instructions to clear the jam:
1. Remove all media from trays 1, 2 and 3.
Pull out any paper that is visibly stuck.
2500C
HP
Removing Paper Jams