Filter
Top Products
MNL FEED LOAD You have chosen to print Load the paper type and
[TYPE] [SIZE] through the Rear Manual size as specified in the LCD
Feed. panel and press to
continue printing.
TRAY [NUMBER] The specified tray is empty. Load the paper size and
EMPTY, LOAD & Load the paper size and type type which this tray
PRESS which this tray has been set has been set up for.
up for. If you wish to change the
paper size setting of this
tray, please refer to
section on Loading Paper.
PRESS TO To continue your present
CONTINUE task, press the button.
MEDIA IN TRAY 1, There is media in Tray 1 which Remove the media in Tray 1
REMOVE may not be the type or size and press the button
that is specified in your to resume printing.
current print job. If you wish to print
through Tray 1, set your
driver to pick from Tray 1
and send the print job
before putting media in
Tray 1.
WRONG MEDIA The media type which the You may wish to either
TYPE, [ACTION] printer has detected is not load in the right media, or
the type specified in your choose to print on existing
print settings. media. You may also cancel
the current print job by
pressing the [Cancel Print]
button.
UNEXPECTED The specified paper size Reload the correct media
PAPER SIZE is different from the into the tray and print again.
paper size in the selected
input tray. The output was
truncated to fit the paper
in the printer. Some output
may have been lost.
PRINT-HDS NOT The printheads have not Align the printheads.
ALIGNED been aligned. For best See below for instructions
print quality, align the on how to align printheads.
printheads before the
next print job.