Filter
Top Products
2
Rear Manual Feed - The Rear Manual Feed is
designed to provide a straight paper path for
printing on thicker media (up to 0.3mm) such as
cardstock or labels without bending. This paper
path allows you to print only 1 sheet at a time.
Loading Commonly-Used Media in Tray 2
Note:
• Tray 2 is a fixed tray. Tray 1 has to be removed
before Tray 2 can be accessed.
• Tray 2 is designed to hold up to 150 sheets of paper
and can accommodate paper sizes such as Letter,
A4, Legal, B4, A3, 11"x17", 13"x19" and 330x483mm.
1. Remove Tray 1 and set it aside.
2. If you wish to change the paper size setting
that has been set in the tray, go to step 3. If
you wish to load paper using the existing
tray setting, go to step 5.
3. Snap the Paper Length and Width Guides
into the slots. Paper size markings are
indicated beside their respective slots.
2