Filter
Top Products
clear intrusion-log
To clear the intrusion log.
clear statistics [ethernet] <port-list>
To reset counters displayed by the console. If a new console session is initiated, the
counters will revert back to the values maintained by the switch hardware.
telnet <ip-addr>
To initiate a telnet session with another network device.
telnet <0..15>
To initiate a telnet session to a member switch in the stack.
Parameters:
<0..15> specifies the number of the switch to be contacted.
getmib <object-name> [<object-name> …]
Retrieves and displays the MIB object defined by object-name.
walkmib <object-name>
This command shows a group of managed object values.
8