Filter
Top Products
primary-vlan <vlan-id>
Sets the primary VLAN used for network management.
[no] vlan <vlan-id>
Creates a new VLAN or changes the system context to the VLAN configuration
level. Note that vlan-name can be substituted for the vlan-id when using this command.
static-vlan <vlan-id>
Creates a new static VLAN from one which has been dynamically created by GVRP.
[no] vlan-support
Enables VLAN support on the switch.
2.13.3 VLAN Interface commands
To enter the VLAN Interface Configuration level, use the vlan command described above.
Note that any of the following commands can be appended to the vlan command to simply
change the configuration. For example:
HP 4108GL(config)# add vlan 2 name orange-lan
name <vlan-name>
Changes the current VLAN identifier’s name.
[no] tagged <port-list>
Assigns ports to current VLAN identifier as tagged.
[no] untagged <port-list>
Assigns ports to current VLAN identifier as untagged.
[no] forbid <port-list>
Forbids the ports from ever becoming a member of the current VLAN.
37