Filter
Top Products
Troubleshooting
Diagnostic Tools
CLI Administrative and Troubleshooting Commands
These commands provide information or perform actions that you may find
helpful in troubleshooting operating problems with the switch.
Note For more on the CLI, refer to “Using the Command Line Interface (CLI)” on
page 4-1.
Syntax: show version
Shows the software version currently running on the
switch,
and the flash image from which the switch booted (primary
or secondary).
show boot-history
Displays the switch shutdown history.
show history
Displays the current command history.
[no] page
Toggles the paging mode for display commands between
continuous listing and per-page listing.
setup
Displays the Switch Setup screen from the menu interface.
repeat
Repeatedly executes the previous command until a key is
pressed.
kill
Terminates all other active sessions.
C-42