2-10
www.hp.com
Hardware Reference Guide
Hardware Upgrades
Internal Battery
1. Complete steps 1 through 4 of the “General Hardware Installation
Sequence” on page 2-1.
2. Locate the battery on the system board.
3. Pull back on the clip 1 that is holding the battery in place, and
remove the battery 2.
4. Insert the new battery and position the clip back into place.
Removing and Replacing the Internal Battery
5. Complete steps 6 through 10 of the “General Hardware
Installation Sequence” on page 2-1.
MultiBay Hard Drive and Diskette Drive
The MultiBay hard drive and diskette drive are available as options on
select thin client models. These are external USB compatible drives.
For additional installation information about these drives visit
www.hp.com/products/thinclientsoftware
or refer to the instructions
that accompany these option.