Filter
Top Products
Hardware Reference Guide
www.hp.com
D-1
D
Routine Thin Client Care and Shipping
Information
Routine Thin Client Care
Follow these suggestions to take care of the thin client:
■
Operate the thin client on a sturdy, level surface. Leave a 3-inch
(7.6-cm) clearance around the air vents to permit the required
airflow.
■
Never operate the thin client with the outside panel removed.
■
Never restrict the airflow into the thin client by blocking the vents
or air intake.
■
Keep the thin client away from excessive moisture, direct
sunlight, and extremes of heat and cold. For information about
the recommended temperature and humidity ranges for the thin
client, see Appendix A, “Specifications” in this guide.
■
Keep liquids away from the thin client and keyboard.
■
Turn off the thin client before you do either of the following:
❏
Wipe the exterior of the thin client with a soft, damp cloth
as needed. Using cleaning products may discolor or damage
the finish.
❏
Occasionally clean the air vents of the thin client. Lint and
other foreign matter can block the vents and limit the airflow.