Filter
Top Products
Connecting to a Windows NT Server 4.0
Windows 95 SR2
21 Highlight the “TCP/IP” network component and click on the “Properties”
button.
22 If you know your TCP/IP settings, enter them in the “TCP/IP Properties”
dialog box, otherwise leave the IP address choice checked “Obtain an IP
address automatically”, and click “OK” . (If you do not have the required
information, contact your network administrator.)
23 Click on “Close”, and files will copy.
24 Insert the Windows 95 CD-ROM, and click “OK” to the “Insert Disk” dialog
box.
25 When prompted, enter the path for Windows 95 source files and click on
“OK” in the “Copying Files…” dialog box. (If you have an HP preloaded
HDD, set the path statement C:\MASTERS\WIN95\SYSTEM\CABS\”).
If you are using a Vectra VL8, go directly to 26.
If you are using a Vectra VL7, finish the installation by following the
instructions below.
• Set the path to "A:\" and click on "OK." (If you have an HP preloaded
HDD, set the path to "C:\MASTERS\LAN\3C905\DISK1\")
• Click on "Yes" to finish the Setup installation and restart your comput-
er to the "System settings Change" dialog box.
26 Click on “Yes” to finish the Setup installation and restart your computer
to the “System settings Change” dialog box.
c
905.bk : ch_10.fb4 Page 3 Thursday, October 22, 1998 9:51 AM