Filter
Top Products
HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide
Checking the Installation
16 English
4 Highlight 3Com EtherLink 10/100 PCI For Complete PC Management NIC
(3C905C-TX) and click on Update.
5 Insert diskette 1 in your drive and type A:\ at the prompt, then
press E
NTER
. The driver will be automatically updated.
6 Close the Network window and restart the computer when
prompted.
CAUTION
If a service pack was already installed on the PC before the network
interface card was installed, the service pack must be reinstalled.
This will overcome the At Least One Service Failed to Start error when
Windows NT is started.
On some platforms you also need to reinstall certain drivers after
installing the Service Pack. Refer to your PC documentation for more
information.
Checking the Installation
Test whether the card functions on the network by finding another
network device or performing a network operation. If it does not
work correctly, “Troubleshooting” on page 20.
3Com.book Page 16 Tuesday, August 31, 1999 11:36 AM