Filter
Top Products
RTC battery
Description Spare part number
RTC battery 684248-001
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 31).
5. Remove the following components:
a. Bottom door (see
Bottom door on page 33).
b. Keyboard (see
Keyboard on page 45)
c. Top cover (see
Top cover on page 47)
Remove the RTC battery:
1. Position the computer upright with the front toward you.
2. Use a screwdriver to loosen the battery from the slot.
3. Lift the battery from the system board.
Reverse this procedure to install the RTC battery.
58 Chapter 4 Removal and replacement procedures