Filter
Top Products
5–4 Maintenance and Service Guide
Computer Setup
Diagnostics menu
System Configuration menu
✎
Some of the menu items listed in this section may not be supported by your computer.
Select To do this
Memory Check Run a comprehensive test on system memory.
Select To do this
Language (or press f2) Change the Computer Setup language.
Boot Options ■ Set an f9, f10, and f12 delay when starting up.
■ Enable/disable CD-ROM boot.
■ Enable/disable floppy boot.
■ Enable/disable internal network adapter boot and set the
boot mode (PXE).
■ Enable/disable MultiBoot, which sets a boot order that can
include most boot devices in the system.
■ Set the Express Boot Popup delay, in seconds.
■ Set the boot order.
Device Configurations ■ Swap the functions of the
fn key and left ctrl key.
■ Enable/disable USB legacy support. When enabled,
USB legacy support allows the following:
❐ Use of a USB keyboard in Computer Setup, even when
a Windows operating system is not running
❐ Startup from bootable USB devices, including a
hard drive, diskette drive, or optical drive connected by
a USB port to the computer
Built-In Device Options ■ Enable/disable embedded WLAN Device Radio.
■ Enable/disable Network Interface Controller (LAN).
■ Enable/disable LAN/WAN switching.
■ Enable/disable Wake on LAN.
■ Enable/disable the optical disc drive.
Port Options ■ Enable/disable the USB port.
■ Enable/disable the ExpressCard slot.