Filter
Top Products
Installation 10
1. On the desktop, click Start and select Settings > Control Panel > Administrative Tools > Computer
Management to display the Computer Management window.
2. Click Device Manager and then scroll down the list of hardware devices to Network Adapters and
click the plus (+). This expands the list of adapters currently configured. For example, HP NC510x
PCle 10 Gigabit Server Adapter is listed in the example above and is removed with the following
step.
3. Right-click HP NC510x PCIe 10 Gigabit Server Adapter and select Uninstall.
To uninstall dual port 10GbE adapter driver software in Windows, perform the following steps:
1. On the desktop, click Start and select Settings > Control Panel > Administrative Tools > Computer
Management to display the Computer Management window.
2. Click Device Manager and then scroll down the list of hardware devices to Network Adapters and
click the plus (+). This expands the list of adapters currently configured.
3. Locate the two ports listed under Network adapters.
For example, HP NC 512m Dual Port 10GbE Multifunction BL-c Adapter and HP NC 512m Dual
Port 10GbE Multifunction BL-c Adapter #2 are listed in the Computer Management window shown
above and are removed with the following steps.
4. Right-click HP NC 512m Dual Port 10GbE Multifunction BL-c Adapter and select Uninstall.
5. Right-click HP NC 512m Dual Port 10GbE Multifunction BL-c Adapter #2 and select Uninstall.
6. Locate the NetXen Management Interface listed under System devices in the Device Manager
display.
7. Right-click NetXen Management Interface and select Uninstall.
Adapter support on Windows
The following describes how to install HP NC-series network server adapters on the following operating
systems:
• Windows Server 2008
• Windows Server 2008 x64
• Windows Server 2003
• Windows Server 2003 x64
Windows 2008 drivers
The following Windows Server 2008 network adapter drivers are used in this release:
• N1G60i32.sys for NC310xx, NC340x, NC61xx, and NC71xx server adapters
• Q57ND60X.sys for NC10xx, NC150x, NC32xx, NC10xx, NC67xx, and NC77xx server adapters
• N1E6032.sys for NC110x, NC360x, NC364x server adapters
• BXND60X.sys for all Multifunction server adapters
Components for these drivers are located in the \WIN2008 directory of the HP SoftPaq.