Installation 20
o Description: Supported only after Commit command
• SECONDARY
o Syntax: primary | secondary
o Description: Identifies the secondary adapter. Supported only in BIND command.
• SMPMODE
o Syntax: SMPMODE=[SMP | NONSMP]
o Description: Enables/disables SMP aware
• STATUS
o Syntax: status [team=nnn]
o Description: Prints CPQANS status
• TEAM
o Syntax: team=nnnn
o Description: Identifies the team. nnnn=DecimalNumber.
• TX_ECBS_TO_USE
o Syntax: tx_ecbs_to_use=nnn
o Description: Sets number of TX ECBs to allocate per virtual adapter
• VLANID
o Syntax: VlanID=nnn
o Description: Sets team to VLAN mode. Creates MLID edge