Filter
Top Products
Firmware upgrade utility 22
• HP NC373i Multifunction Gigabit Server Adapter
• HP NC373m Multifunction Gigabit Server Adapter
The ccfwupg2.bat command upgrades the Boot Code and Option ROM firmware image on the following
c-Class Gigabit Server Adapters:
• HP NC326i PCIe Dual Port Gigabit Server Adapter
• HP NC326m PCIe Dual Port Gigabit Server Adapter
• HP NC325m PCIe Quad Port Gigabit Server Adapter
Upgrading firmware
To upgrade the boot code and Option ROM image on the adapter, complete the following:
1. Download and extract the HP SoftPaq as described in "Downloading files (on page 9)."
2. Copy all files and folders from the \apps\ccfwupg\ccfwupg1 directory or the
\apps\ccfwupg\ccfwupg2 directory to a bootable diskette or USB drive.
3. Boot to DOS using the diskette.
4. Type ccfwupg1.bat or ccfwupg2.bat and press the Enter key. A confirmation message displays when
the upgrade is complete.
HP NC-Series NetXen Online Firmware Upgrade
Utility
The HP NC-Series NetXen Online Firmware Upgrade Utility for Windows upgrades the flash memory for
HP NC51xx PCIe 10 Gigabit server adapters. Use the following steps to upgrade the firmware.
NOTE: Driver and firmware compatibility must be maintained to ensure proper functionality.
Make sure that the driver and firmware versions match for this release.
The HP NC-Series NetXen Online Firmware Upgrade Utility for Windows upgrades the flash memory for
HP NC51xx PCIe 10 Gigabit server adapters. Use the following steps to upgrade the firmware.
NOTE: Driver and firmware compatibility must be maintained to ensure proper functionality.
Make sure that the driver and firmware versions match for this release.
1. Click the sp#####.exe file to run the self-extracting executable file. One of the extracted files is the
nxflash.exe. This utility upgrades the firmware.
2. Navigate to where the files were downloaded. Ensure that the following binaries are located in the
directory.
nxflash.exe
nxudiag.exe
cx4_hp_romimage
xfp_hp_romimage
hmez_romimage
3. To upgrade the firmware for a specific adapter, launch the nxflash.exe by typing the following
command line syntax in a DOS command window:
nxflash -i NX_NIC --all