Filter
Top Products
IP Routing Features
Configuring OSPF
State
The current state of the interface. The value will be one
of the following:
• DOWN - the underlying VLAN is down
• WAIT - the underlying VLAN is up, but we are waiting to hear hellos
from other routers on this interface before we run designated
router election
• DR - this switch is the designated router for this interface
• BDR - this switch is the backup designated router for this interface
• DROTHER - this router is not the designated router or backup
designated router for this interface
Auth-type
none or simple - will be none if no authentication key is
configured, simple if an authentication key is configured.
All routers running OSPF on the same link must be using
the same authentication type and key.
Cost The OSPF's metric for this interface.
Priority This routing switch's priority on this interface for use in
the designated router election algorithm.
This Field... Displays...
The <ip-addr> parameter displays the OSPF interface information for the
specified IP address.
Displaying OSPF Interface Information for a Specific VLAN
or IP Address
To display OSPF interface information for a specific VLAN or IP address, enter
a command such as the following at any CLI level:
HPswitch# show ip ospf interface 10.3.18.36
16-57