Filter
Top Products
hp scanjet 5530 digital flatbed scanner
chapter 2
13
inserting a negative into the slide holder with a slide light shield
Caution! Negatives are easily damaged. Touch them only on their
edges.
3 If you are scanning a negative strip with fewer than four frames, insert the
negative light shield after you load the negative strip. See the icon on the
negative light shield for assistance.
4 Slide the negative holder into the slide holder on the bottom side of the
TMA light source.
negative holder inserted into the slide holder
5 Place the TMA light source into the positioning plate with negatives facing
down. The TMA cable should fit in the groove on the same end of the
positioning plate as the reference marks.
TMA placed into the positioning plate
6 Press the Scan Picture ( ) button on the front of the scanner.
7 Follow the instructions on the screen to complete the scan. Choose the
selection handle you want to move and adjust the area to frame the image.
Scanner06_Usermanual.book Page 13 Friday, April 4, 2003 5:18 PM