Filter
Top Products
user’s manual
how to scan slides and negatives
14
Note: For information about rotating the image, adjusting color or size, or
making other changes to the image, see adjust an image during the
preview in the HP Photo & Imaging software Help.
8 Click Accept when image adjustments are complete.
adjust an image when scanning with the TMA
During the scan preview, you can make optional adjustments to slides or
negatives that you scan by using the TMA. Before deciding to make adjustments,
select and drag the handles around the selection area until you see the image
area you want to scan. This ensures that the software exposes it correctly. See
adjust an image during the preview in the HP Photo & Imaging software
Help.
If you want to make adjustments to the image after you create a selection area,
see adjust an image during the preview in the HP Photo & Imaging software
Help.
resolve issues with the transparent materials adapter (TMA)
Use this section to help resolve issues that might occur when you are using the
TMA.
the TMA is not working at all
• The TMA cable might not be connected correctly. Make sure that the TMA
cable is connected securely to the TMA port on the scanner.
• Make sure the TMA is properly positioned on the scanner glass so that the
sensor on the back of the lamp faces the back of the scanner.
• You can also try the following:
a. Unplug the TMA cable from the back of the scanner.
b. Unplug the power cable from the back of the scanner.
c. Reconnect the TMA cable to the scanner.
d. Wait 30 seconds, and then reconnect the power cable to the scanner.
cannot select slides from a TMA or negatives from a TMA in the Scan Picture
dialog box
• The TMA cable might not be connected correctly. Make sure that the TMA
cable is connected securely to the TMA port on the scanner.
• If you connected the TMA while the HP Photo & Imaging Director software
was running, restart the software. This allows the software to detect the
TMA.
• The HP Director has bypassed the Scan Picture dialog box and shows the
HP Scanning software dialog box. Select Scan, and click Slides from a
Transparent Materials Adapter or Negatives from a Transparent Materials
Adapter.
Scanner06_Usermanual.book Page 14 Friday, April 4, 2003 5:18 PM