Filter
Top Products
Hardware options installation 35
o
Four-bay LFF drive cage with Mini-SAS cable connected to the low-profile slot
9. In the four-bay LFF drive cage configuration, HP recommends securing the excess length of the 890 mm
Mini-SAS cable by using the cable clip that came with the kit:
a. Use the two vertical dash marks in front of the fan cage to position the clip correctly, and then attach
the cable clip.
b. Secure the excess length of the 890 mm Mini-SAS cable in the cable clip.
10. In the eight-bay SFF drive cage configuration, route the Mini-SAS cable along the side of the system
board towards the front chassis, and then connect the cable to the drive backplane.