Filter
Top Products
Hardware options installation 40
8.
Route the capacitor pack cable towards the front chassis.
For more information on capacitor pack cabling in different drive configurations, see "Storage cabling
(on page 70)."
9. Install the capacitor pack:
a. Insert the cable end of the capacitor pack in the holder.
b. Press the opposite end of the capacitor pack in the holder.
10. Install the access panel (on page 19).
11. Install the server into the rack ("Installing the server into the rack" on page 26).
12. Power up the server (on page 16).
Optical drive option
To install the component:
1. Power down the server (on page 16).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
o Extend the server from the rack (on page 16).
o Remove the server from the rack (on page 17).
4. Remove the optical drive blank: