Filter
Top Products
Hardware options installation 54
b.
Disconnect each power cord from the server.
3. Remove any attached network cables.
4. Extend the server from the rack (on page 19).
5. Remove the access panel (on page 21).
6. Remove the primary PCIe riser cage (on page 23).
7. Loosen the thumbscrew.
8. Remove the existing FlexibleLOM.
Pull the FlexibleLOM toward the front of the server while removing it, to avoid catching it on the rear
chassis.
To install the optional FlexibleLOM:
1. Firmly seat the FlexibleLOM in the slot, and then tighten the thumbscrew.
2. Install the PCIe riser cage ("Install the primary PCIe riser cage" on page 23).
3. Install the access panel (on page 21).