Filter
Top Products
Note Use the negative light shield to cover the remaining area in the
negative holder if you are scanning fewer than the maximum number of
negative frames with the TMA. This ensures that no extra light leaks into the
scan.
5. Snap shut any open doors on the template.
6. Place the template on the scanner glass and close the scanner lid. Align the arrow
on the template with the corner reference mark on the scanner bed.
7. Do one of the following tasks:
Windows
Do one of the following:
– From HP Solution Center, click Scan Film.
– Press customizable button 1.
Macintosh
From the HP Device Manager, click Scan Film.
8. Follow the onscreen instructions to complete the scan.
9. When finished, remove the negatives from the template.
10. Replace the TMA cover by pressing the top tab of the TMA cover into place and then
pressing the bottom tab into place.
Chapter 5
34 HP Scanjet 8300 series