Filter
Top Products
4. Clean the feed-roller assembly manually. For more information, see Clean the feed-
roller assembly manually.
5. Clean the ADF window. For more information, see Clean the ADF window.
An item loaded in the ADF jams repeatedly
● The item does not meet the guidelines for the ADF. For more information, see Scan
with the automatic document feeder (ADF).
● The item might have something on it, such as staples or self-adhesive notes on the
original that must be removed.
Clear jams from the ADF
If the ADF jams, look at the scanner LCD panel. The LCD panel indicates where the jam
has occurred.
Clear a jam from the start of the paper path
1. Remove any loose pages from the ADF input tray. Remove the input tray from the
ADF.
2. Raise the ADF lid.
3. Lift the large green tab located to the left of the feed-roller assembly, and then gently
remove the jammed page.
4. Lower the feed-roller assembly to a horizontal position, and then close the ADF lid.
Press down firmly until you hear a click.
Chapter 10
58 HP Scanjet 8300 series