Filter
Top Products
Changing from Desktop to Tower Configuration
The Ultra-Slim Desktop can be used in a tower orientation with the tower stand included with the
computer.
1. Remove/disengage any security devices that prohibit opening the computer.
2. Remove all removable media, such as compact discs or USB flash drives, from the computer.
3. Turn off the computer properly through the operating system, then turn off any external devices.
4. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION: Regardless of the power-on state, voltage is always present on the system board
as long as the system is plugged into an active AC outlet. You must disconnect the power cord
to avoid damage to the internal components of the computer.
5. Orient the computer so that its left side is facing down and place the computer firmly down into
the stand.
Figure 5-7 Placing the Computer on the Stand
6. Reconnect the external equipment, plug the power cord into a power outlet, and turn the
computer on.
NOTE: Ensure at least 10.2 centimeters (4 inches) of space on all sides of the computer
remains clear and free of obstructions.
7. Lock any security devices that were disengaged when the computer cover or access panel was
removed.
NOTE: An optional Quick Release mounting bracket is available from HP for mounting the computer
to a wall, desk, or swing arm.
134 Chapter 5 Ultra-Slim Desktop (USDT) Hardware Upgrades