Filter
Top Products
10
EN
Step 3: Installing the Cables
To connect the power cord to a
printer with a stand
Note
Make sure that the printer is off (power
button out) before connecting the power
cord.
1
Roll the printer to its permanent
location, where all four wheels rest on
a level floor surface, and stabilize it by
pushing the locking tabs on the
printer stand's wheels to the locked
position.
WARNING!
An unstable printer can tip over and
cause injury; make sure that the printer
is secured properly.
2
Plug the female end of the power
cord into the connector on the back
left corner of the printer.
3
Plug the male end of the power cord
into a surge protector or other
grounded power source.