Filter
Top Products
To transport the HP Photosmart A320 series
1. Turn off the printer.
NOTE: Make sure the printer completes its power-down cycle before you unplug
the power cord. This allows the printer to store the print cartridge properly.
2. If a camera or Bluetooth adapter is connected to the PictBridge port on the top of the
printer, disconnect it.
3. Remove all paper from the input and output trays, close the output tray, and then
close the input tray.
4. Unplug the power cord.
5. If the printer is connected to a computer, disconnect the USB cable from the computer.
6. Always carry the printer upright.
NOTE: Do not remove the print cartridge when transporting the printer. The
printer stores the print cartridge in a protective cap during the power-down cycle
TIP: The printer has a convenient built-in handle you can use to make it easy to
carry. Extend the handle by lifting it up from above the camera dock door. Do not
shake or swing the printer while carrying it by the handle.
Figure 5-3 Extend the handle
Make sure to bring the following items with you:
• Paper
• Power cord
• A PictBridge-certified camera
• Extra print cartridges (if you plan to print a lot)
• Optional printer accessories you plan to use, such as the HP Bluetooth wireless
printer adapter
• If you are going to connect the printer to a computer, bring the USB cable and
HP Photosmart software CD
Transport the printer 25