Filter
Top Products
Configuring the Product
38 Embedded Web Server User Guide
Configuring Network Information
Verify the type of LAN installation with the customer’s network administrator. If
one HP product is installed on a dedicated LAN, network information (IP address,
subnet mask, and gateway address) does not require change.
If multiple HP products are installed or a public LAN segment is used, network
information must be changed to conform to the customer’s LAN addressing
scheme.
Perform the following steps to change a product’s IP address, subnet mask, or
gateway address.
1. Choose Configure from the navigation panel.
2. Click the Switch or Director tab, then click the Network tab to display the
Network tab view (Figure 9).
Figure 9: Configuring network parameters tab view
a. At the IP Address field, type the new value specified by the customer’s
network administrator (default is 10.1.1.10).
b. At the Subnet Mask field, type the new value specified by the customer’s
network administrator (default is 255.0.0.0).
c. At the Gateway Address field, type the new value specified by the
customer’s network administrator (default is 0.0.0.0).