Filter
Top Products
1HBAfeatures
This chapter describes the features of the FC1143 single-port HBA (product number AB429A) and
FC1243 dual-port HBA (product number AE369A).
•Performance specifications,page11
•Environmental specifications,page12
•Physical specifications, page 12
Performance specifications
The FC1143 and FC1243 HBA s are 4Gb PCI-X 2.0 high-performance direct memory access (DMA)
bus master HBAs designed for high-end systems.
These HBAs have the following features:
• Combines a p
owerful reduced instruction set computing (RISC) processor, a Fibre Channel
protocol manager (FPM) with 4Gb Fibre Channel transceivers, and a p eripheral component
interconnect (PCI) or peripheral component interconnect-extended (PCI-X) local bus interface in
a
single-chip solution
• Supports F
abric Loop Attach (FLA) connections
• Supports bus master DMA
• Supports SCSI-3 Fibre Channel Protocol (SCSI-FCP) , and Fibre Channel-Virtual Interface (FC-VI)
protocol
s
• Supports point-to-point fabric connection (F-PORT FABRIC LOGIN)
• Complies with:
•PCI Local
Bus
Specification revision 2.3
• PCI-X Protocol Addendum to the PCI Local Bus Specification, revision 2.0a
• PCI-X Electrical and Mechanical Addendum (revision 2.0a) to the PCI Local Bus Specification
•PCI Bus P
ower Management Interface Specification revision 1.1
•PCI Hot Plug Specification, revision 1.0PCI-X Addendum (revision 1.0) to the PCI Local Bus
Specification
• Third-generation Fibre Channel–Physical and Signaling Interface (FC-PH) standard
•Fibre C
hannel-Arbitrated Loop (FC-AL-2) standard
• Fibre Channel Framing and Signaling (FC-FS)
• U.S. and international safety and emissions standards
FC1143 and FC1243 4Gb PCI-X 2.0 host bus adapters for Linux and Windows
11