Table 6 FLASUTIL commands
Compon ent Option Desc riptio n
Boot Code image
/F xxxx Writes BIOS Flash. If the flash contains a valid
BIOS, the existing NVRAM defaults d o not
change.
/C xxxx Verifies the BIOS Flash of the specified HBA.
/Wxxxx Copies the BIOS Flash to the QL1xROM.SAV file.
Fcode image
/FFxxxx Writes FCode flash for the specified HBA a ddress.
/CFxxxx Verifies Fcode of the specified HBA.
RISC code image
/FRxxxx Writes RISC code to Flash at the specified HBA
address.
/CRxxxx Verifies the RISC code of the specified HBA.
/WRxxxx Copies theRISCcodefrom Flash to a file.
1M complete flash
image
/FBxxxx Verifies the 1Mb combined image in Flash.
/CBxxxx
Writes 1Mb com
bined image to Flash.
/WBxxxx Copies 1Mb image from Flash to a file.
/I
Ignores Subsystem ID.
/M Does not prompt for I/O address.
/O filename.ext> Uses filename.ext instead of QLxxRXX.BIN file.
/Q
Does not display m essages.
/S xxxx Displays the serial number of the specified HBA.
/U xxxx Updates the NVRAM defaults in the BIOS for the
specified HBA.
If
the SSVID/SSID in the NVRAM files do not
match those in the NVRAM, the NVRAM and the
BIOS are not updated.
/V xxxx Displays the current BIOS version for the specified
HBA.
/VR xxxx Displays the current RISC version for the specified
HBA.
/Y xxxx Displays thePortNameofthe specified HBA.
NVRAM
/D xxxx Copies NVRAM to the QL1xNVRM.SAV file for
the
specified HBA.
/L xxxx Writes NVRAM for the specified HBA.
/N filename.ext> Uses filename.ext instead of NVRMxxx.DAT file.
/X xxxx Verifies the NVRAM for the specified HBA.
FC1143 and FC1243 4Gb PCI-X 2.0 host bus adapters for Linux and Windows
21