Filter
Top Products
Cause: You had inserted the memory card backwards or upside down.
Card is damaged
Solution: Reformat your memory card in your camera or format your memory card
in a computer by selecting the FAT format. For more information, see the
documentation that came with your digital camera.
CAUTION: Reformatting the memory card will delete any photos stored on the
card. If you have previously transferred the photos from your memory card to a
computer, try printing the photos from the computer. Otherwise, you will need to
retake any photos you might have lost.
Cause: You may have formatted the card on a Windows XP computer. By default,
Windows XP will format a memory card of 8 MB or less and 64 MB or more with the
FAT32 format. Digital cameras and other devices use the FAT (FAT16 or FAT12)
format and cannot recognize a FAT32 formatted card.
Card is not fully inserted
Solution: Turn the memory card so that the label faces up and the contacts are
facing the product, and then push the card forward into the appropriate slot until the
Photo light turns on.
After the memory card has been inserted properly, the Photo light will blink for a few
seconds, and then remain lit.
Cause: You had not fully inserted the memory card.
Paper messages
The following is a list of paper-related error messages:
•
Paper upside down
•
Paper orientation error
•
Ink is drying
Paper upside down
Solution: Load paper in the paper tray print side down.
Cause: Paper in the paper tray was upside down.
Paper orientation error
Solution: Insert paper into the paper tray with the short edge forward and the print
side down. Slide the paper forward until it stops.
Cause: Paper in the paper tray was in landscape orientation.
Chapter 11
74 Solve a problem
Solve a problem