Filter
Top Products
Keyboard
Description Spare part number
For use in the United States, Black 640892-001
For use in French Canada, Black 640892-121
For use in the United States, White 653390-001
For use in Latin America, White 653390-161
Before removing the keyboard, remove the following components:
1. Battery (see
Battery on page 41)
2. Service door (see
Service door on page 42)
Remove the keyboard:
1.
Remove the Phillips 4.0 x 2.5 screw (1) in the WLAN module bay that secures the keyboard to
the computer.
2. Using a thin, flat-bladed screwdriver, gently pry loose the three snaps (2) inside the battery bay to
release the top edge keyboard tabs.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest (1).
6. Release the zero insertion force (ZIF) connector (2) to which the keyboard cable is attached, and
then disconnect the keyboard cable (3) from the system board.
Component replacement procedures
51