Filter
Top Products
8.
Flex and lift up on the inside edges of the bezel on the left side (1), the top and bottom (2), and
the right side (3) until the bezel disengages from the display back cover.
9.
Remove the display bezel (4).
Reverse this procedure to install the display bezel.
10. To replace the webcam module, lift the webcam module as far from the display enclosure as the
webcam module cable allows.
11. Disconnect the webcam module cable (1) from the webcam module, and then remove the
webcam module (2). The webcam module is available using spare part number 640880-001.
Reverse this procedure to install the webcam module.
Component replacement procedures
65