Filter
Top Products
Removal and replacement procedures 28
4.
Remove the FBDIMM.
To replace the component, reverse the removal procedure.
Hard drive backplane
Some models of this server blade do not include a hard drive backplane.
To remove the component:
1.
Power down the server blade (on page 24).
2.
Remove the server blade (on page 24).
3.
Remove the access panel ("Access panel" on page 25).
4.
Remove all hard drives ("Hard drive" on page 26).
5.
Remove all hard drive blanks ("Hard drive blank" on page 25).
CAUTION: Remove all hard drives and hard drive blanks before removing the hard drive
backplane.