Filter
Top Products
Removal and replacement procedures 30
2.
Remove the server blade (on page 24).
3.
Remove the access panel ("Access panel" on page 25).
4.
Remove all hard drives ("Hard drive" on page 26).
5.
Remove all hard drive blanks ("Hard drive blank" on page 25).
CAUTION: Remove all hard drives and hard drive blanks before removing the hard drive
backplane.
6.
Remove the hard drive backplane ("Hard drive backplane" on page 28).
7.
Remove the hard drive backplane retainer.
To replace the component:
1.
Install the hard drive backplane retainer.
2.
Install the hard drive backplane ("Hard drive backplane" on page 28).
3.
Install the hard drives ("Hard drive" on page 26).