Filter
Top Products
Removal and replacement procedures 32
4.
Remove the mezzanine card.
To replace the component:
1.
Install the mezzanine card. Press down on the connector to seat the card.
2.
Install the access panel ("Access panel" on page 25).
3.
Install the server blade.
HP Smart Array E200i Controller cache module
To remove the component:
1.
Power down the server blade (on page 24).
2.
Remove the server blade (on page 24).
3.
Remove the access panel ("Access panel" on page 25).
4.
Remove all hard drives ("Hard drive" on page 26).