Filter
Top Products
Removal and replacement procedures 42
6.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an
"X" pattern).
7.
Install the heatsink.
8.
Install the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on page
31).
9.
Install the hard drive backplane ("Hard drive backplane" on page 28).
10.
Install the hard drive blanks ("Hard drive blank" on page 25).
11.
Install the hard drives ("Hard drive" on page 26).
12.
Install the access panel ("Access panel" on page 25).
13.
Install the server blade.