Filter
Top Products
Removal and replacement procedures 27
To replace the component, reverse the removal procedure.
DIMM baffle
CAUTION: To avoid damage to the server blade and the enclosure, install all DIMM baffles in
the proper location after adding or replacing DIMMs. DIMM baffles that are missing or
installed incorrectly can compromise server blade and enclosure cooling.
To remove the component:
1.
Power down the server blade (on page 23).
2.
Remove the server blade (on page 23).
3.
Remove the access panel ("Access panel" on page 24).
4.
Remove the solid state drives, if installed ("Solid state drive" on page 26).
5.
Remove the DIMM baffle.
To replace the component, reverse the removal procedure.
DIMM
CAUTION: Use only HP DIMMs. DIMMs from other sources may adversely affect data
integrity.
To remove the component:
1.
Power down the server blade (on page 23).
2.
Remove the server blade (on page 23).
3.
Remove the access panel ("Access panel" on page 24).
4.
Remove the SSD drives, if installed ("Solid state drive" on page 26).
5.
Remove all DIMM baffles ("DIMM baffle" on page 27).