Filter
Top Products
8 3 Copying a Page
Your first capture
Using the HP CapShare appliance is quick and simple.
Note
Use the Quick Start card to copy your first page.
1 Make sure that the page you want to capture is free of paper clips, staples, folds,
wrinkles, or any other obstacles that may cause the HP CapShare appliance to tilt.
2 Turn the HP CapShare appliance on by pressing the Power button on the right
side of the HP CapShare appliance.
3 Place the HP CapShare appliance on the upper-left corner of the page.
4 Press and release the Capture button and move the HP
CapShare appliance down the left side of the page, to the right,
then up the right-hand side of the page (U-shaped path).
Note
Keep the entire base of the appliance flat on the page
at all times, and be sure to overlap the down and up paths by at least 0.5 inches (1.2 cm).
5 Lift the appliance off the page to stop the capture. You can also press and hold the
Capture button for the duration of the capture.
The copied page is saved and a thumbnail view of the copied page now shows on the
HP CapShare appliance display. The new thumbnail appears after the last previously
captured page.
See Preferred capture path (page 9) for other paths that you can use.
Joaquin.book Page 8 Wednesday, July 28, 1999 3:32 PM