Filter
Top Products
Removal and replacement procedures 39
4. Remove the interconnect switch or Pass-Thru module.
CAUTION: For best cooling practices, do not operate the enclosure for extended periods with
more than one component or blank removed. When removing an active component, replace it
with a blank.
To replace the component, reverse the removal procedure.
Interconnect bay dividers
To remove the component:
1. Remove the interconnect switches and Pass-Thru modules ("Interconnect switch or Pass-Thru module"
on page 38).
2. Remove the interconnect blanks ("Interconnect blank" on page 37).
3. Press the release tab.