Filter
Top Products
To open the HP Printer Utility from the Printer Setup Utility
1. From the Finder, select Computer from the Go menu.
2. Select the device from the list, and then press Utility.
3. Select the device from the menu, and then press Launch Utility.
HP Printer Utility panels
Information and Support panel
• Supplies Status: Shows the information about currently installed print cartridges.
• Supply Info: Shows the print cartridge replacement options.
• Device Information: Displays information about the model and serial number. This
page contains information about the device and the supplies.
• Clean: Guides you through cleaning the print cartridges.
• Align: Guides you through aligning the print cartridges.
• HP Support: Gain access to HP Web site where you can find support for the device,
register the device, and find information about returning and recycling used printing
supplies.
Set up faxing for the device
After completing all the steps in the getting started guide, use the instructions in this
section to complete your fax setup. Keep your getting started guide for later use.
In this section, you will learn how to set up the device so that faxing works successfully
with equipment and services you might already have on the same phone line.
TIP: You can also use the Fax Setup Wizard (Windows) or HP Fax Setup Utility (Mac
OS) to help you quickly set up some important fax settings such as the answer mode
and fax header information. You can access the Fax Setup Wizard (Windows) or HP
Fax Setup Utility (Mac OS) through the software you installed with the device. After
you run the Fax Setup Wizard (Windows) or HP Fax Setup Utility (Mac OS), follow
the procedures in this section to complete your fax setup.
Chapter 7
72 Configure and manage