Filter
Top Products
7. Holding the DIMM by the edges, align the notch on the DIMM with the bar in the DIMM slot at an
angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the
metal contacts are not visible.
X
O
X
O
XO
X
O
XO
XO
X
OX
O
X
O
XOX
OXO
X
O
X
O
XO
XO
XO
XO
X
OX
O
XO
XO
XO
X
OXOX
O
XO
XOXO
X
OX
O
XO
X
O
X
O
XOX
O
X
O
XO
X
O
XO
XO
XO
XO
XOXOXO
XO
X
O
XO
X
O
X
O
XO
XO
X
OXO
XOXOXO
X
OX
O
XO
X
O
X
OXO
XOXO
XO
X
OXOXO
X
O
X
O
XO
XO
X
OXO
X
O
XOXO
XO
XOX
O
XO
X
OX
OXO
X
O
XO
XO
8. Push down on the DIMM until both latches engage the DIMM.
XO
XOXO
X
O
X
O
XO
XOXOX
OX
OX
OXO
X
O
X
OXOXOX
OXO
X
O
XO
XOXOXO
X
O
XOXO
XOXOXO
XOXOXO
XO
XOXO
XO
XOXO
X
O
XOXO
X
OX
O
XO
XO
X
OXO
X
OX
O
XO
X
OXOXO
XO
XOXO
X
OX
OX
O
XO
X
OX
OXO
XOXO
XO
X
OX
OXO
XI
O
XIOXIXO
OXIXO
XIOXIO
XIO
XIOXIXO
O
XIXO
XIOXIO
XIO
XI
O
XIXO
OXIXO
XIO
XIO
XIO
XIOXIXO
OXIXO
XIOXIO
NOTE: If you have difficulty inserting the DIMM, make sure the notch on the bottom of the DIMM
is aligned with the bar in the slot. If the DIMM still does not go in, make sure you are using the
correct type of DIMM.
9. Align the formatter board in the tracks at the bottom of the slot, and then slide the board back into
the product.
NOTE: To prevent damage to the formatter board, ensure the formatter board is aligned in the
tracks at the top and the bottom of the opening.
ENWW Replacement instructions 171