Filter
Top Products
Menu item Sub-menu item Values Description
COPIES Range: 1 - 32000 Allows you to set the default
number of copies for print jobs.
The default number is 1.
DEFAULT PAPER SIZE A list of available sizes
appears. See
Supported
paper sizes on page 83.
Allows you to set the default
paper size.
DEFAULT CUSTOM PAPER
SIZE
●
UNIT OF MEASURE
●
X DIMENSION
●
Y DIMENSION
Allows you to set the default size
for any custom print job that
does not specify the dimensions.
The default unit of measure is
MILLIMETERS.
DUPLEX OFF*
ON
Allows you to enable or disable
two-sided printing.
NOTE: This menu is available
only on models that have
automatic duplexing.
DUPLEX BINDING LONG EDGE*
SHORT EDGE
Allows you to change the binding
edge for two-sided printing.
NOTE: This menu is available
only on models that have
automatic duplexing.
OVERRIDE A4/LETTER NO
YES*
Allows you to set the product to
print an A4 job on letter-size
paper when no tray is configured
for A4 paper, or to print on A4-
size paper when no tray is
configured for letter paper.
MANUAL FEED OFF*
ON
Setting this option to ON makes
MANUAL FEED the default for
jobs that do not select a tray. The
Autoselect option in the printer
driver overrides this option.
COURIER FONT REGULAR*
DARK
Allows you to select a version of
the Courier font.
The DARK setting is an internal
Courier font available on HP
LaserJet Series III printers and
older.
WIDE A4 NO *
YES
Allows you to change the
printable area of A4 paper. If you
select NO, the printable area is
seventy-eight 10-pitch
characters on a single line. If you
select YES, the printable area is
eighty 10-pitch characters on a
single line.
20 Chapter 2 Control panel menus ENWW