Filter
Top Products
Set resolution settings
NOTE: Increasing the resolution increases the fax size. Larger faxes increase the send time and could
exceed the available memory in the product.
The factory-set default resolution setting is Fine.
Use this procedure to change the default resolution for all fax jobs to one of the following settings:
●
Standard: This setting provides the lowest quality and the fastest transmission time.
●
Fine: This setting provides a higher resolution quality than Standard that is usually appropriate
for text documents.
●
Superfine: This setting is best used for documents that mix text and images. The transmission time
is slower than the Fine setting but faster than the Photo setting.
●
Photo: This setting produces the best images, but greatly increases the transmission time.
Set the default resolution setting
1. On the control panel, press the Setup
button.
2. Use the arrow buttons to select the Fax setup menu, and then press the OK button.
3. Use the arrow buttons to select the Fax Send setup menu, and then press the OK button.
4. Use the arrow buttons to select the Def. Resolution menu, and then press the OK button.
5. Use the arrow buttons to change the resolution setting.
6. Press the OK button to save the selection.
Cover-page templates
Several business and personal fax cover-page templates are available in the PC Fax Send software
program.
NOTE: Cover-sheet templates cannot be altered. While fields within the templates may be edited, the
templates themselves are fixed forms.
Customize a fax cover sheet
1. Open the PC Fax Send software program.
2. In the Fax To section, provide the recipient fax number, name, and company.
3. In the Resolution section, select a resolution setting.
4. In the Include With Fax section, select Cover Page.
5. Add more information in the Notes and Subject text boxes.
ENWW
Set fax settings
119